PRODUCTS SHOW+

2.5W/m-K Thermal Conductive Silicone Gasket 1.0mmT

2.5W/m-K Thermal Conductive Silicone Gasket 1.0mmT

2.5W/m-K Thermal Conductive Silicone Gasket 1.0mmT

We're here to help Easy ways to get the answers you need. Contact Us
Details
 2.5w/m-K Thermal Conductive Silicone Gasket 1.0mmT For Wireless Router 

TP250 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between heat generating components and heat sinks. 

Due to its low hardness and great compressibility, TP250 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems. 

It can replace Fujipoly GR25A , Laird Tflex500, Bergquist GP2500 ,Denka FSL-BS.

TP250 series thermal pad main features:

Thermal conductivity: 2.5 W/m-K

Extremely soft and cost effective

Naturally tacky for easy assembly

Electrically insulating

TP250 series thermal pad typical applications:

LED lighting

Power conversion / supply

Thermal module

Electric vehicle battery

Semiconductor, IC, CPU.MOS and heatsink

Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader

TP250 thermal pad properties
Properties Units TP250 Test Method
Main Composition --- Silicone & Ceramic filled ---
Color --- Light Blue / Light Yellow Visual
Thickness Range mm 0.3~5.0 ---
Hardness Shore 00 45-50 ASTM D2240
Density g/cc 2.93 ASTM D792
Tensile Strength KN/m 0.4 ASTM D412
Elongation % 75% ASTM D412
Continuous Use Temp -40 to 200 EN344
Breakdown Voltage Kv/mm ≥5.0 ASTM D149
Volume Impedance ohm-cm 3.2*1016 ASTM D257
Dielectric Constant 1MHz 6.2 ASTM D150
Thermal Impedance@0.5mm 14.5psi in2/W 0.35 ASTM D5470
Flame Rating --- V0 UL 94
Thermal Conductivity W/m.k 2.5 ASTM D5470
SGS, RoHS, REACH --- Compliance ---

Similar Material Comparison
Brand Baisontech Bergquist Laird Fujipoly
Model TP250 GP2500 Tflex 500 GR-25A
Conductivity(W/m-k) 2.5 1.5 2.8 2.5
Thickness(mm) 0.3-5.0 0.5-5.0 0.5-5.0 0.5-3.0
Hardness(Shore 00) 45-50 40 40 30
Compliance UL 94 UL 94 UL 94 UL 94


Configurations:

Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with PSA on reinforced side.