2.5W/m-K Ultra Thin Thermal Silicone Pad 0.2mmT
2.5W/m-K Ultra Thin Thermal Silicone Pad 0.2mmT
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
2.5w/m-K Ultra Thin Thermal Silicone Pad 0.2mmT
TP250 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP250 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace Fujipoly GR25A , Laird Tflex500, Bergquist GP2500 ,Denka FSL-BS.
TP250 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP250 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
TP250 series thermal pad main features:
Thermal conductivity: 2.5 W/m-K
Extremely soft and cost effective
Naturally tacky for easy assembly
Electrically insulating
TP250 series thermal pad typical applications:
LED lighting
Power conversion / supply
Thermal module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Properties | Units | TP250 | Test Method |
Main Composition | --- | Silicone & Ceramic filled | --- |
Color | --- | Light Blue / Light Yellow | Visual |
Thickness Range | mm | 0.3~10.0 | --- |
Hardness | Shore 00 | 30-60 | ASTM D2240 |
Density | g/cc | 2.93 | ASTM D792 |
Tensile Strength | KN/m | 0.4 | ASTM D412 |
Elongation | % | 75% | ASTM D412 |
Continuous Use Temp | ℃ | -40 to 200 | EN344 |
Breakdown Voltage | Kv/mm | ≥5.0 | ASTM D149 |
Volume Impedance | ohm-cm | 3.2*1016 | ASTM D257 |
Dielectric Constant | 1MHz | 6.2 | ASTM D150 |
Thermal Impedance@0.5mm 14.5psi | ℃in2/W | 0.35 | ASTM D5470 |
Flame Rating | --- | V-0 | UL 94 |
Thermal Conductivity | W/m.k | 2.5 | ASTM D5470 |
SGS, RoHS, REACH | --- | Compliance | --- |
Brand | Baisontech | Bergquist | Laird | Fujipoly |
Model | TP250 | GP2500 | Tflex 500 | GR-25A |
Conductivity(W/m-k) | 2.5 | 1.5 | 2.8 | 2.5 |
Thickness(mm) | 0.3-10.0 | 0.5-5.0 | 0.5-5.0 | 0.5-3.0 |
Hardness(Shore 00) | 30-60 | 40 | 40 | 30 |
Compliance | UL 94 | UL 94 | UL 94 | UL 94 |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with PSA on reinforced side.