PRODUCTS SHOW+

3.0w/m-K Thermally Conductive Soft Silicone Films

3.0w/m-K Thermally Conductive Soft Silicone Films

3.0w/m-K Thermally Conductive Soft Silicone Films

We're here to help Easy ways to get the answers you need. Contact Us
Details
3.0w/m-K Thermally Conductive Soft Silicone Films

TP300 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between
heat generating components and heat sinks. 

Due to its low hardness and great compressibility, TP300 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems. 

It can replace
 Fujipoly GR-L , Laird Tflex600 , Bergquist GP2500/GP3000 

TP300 series thermal pad main features:

Thermal conductivity: 3.0 W/m-K


High comformability and cost effective

Naturally tacky on both sides

Electrically insulating

TP300 series thermal pad typical applications:

LED lighting

Power conversion / supply

Thermal module

Electric vehicle battery

Semiconductor, IC, CPU.MOS and heatsink

Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader

TP300 thermal pad properties
Properties Units TP300 Test Method
Main Composition --- Silicone & Ceramic filled ---
Color --- Light Blue Visual
Thickness Range mm 0.3~10.0 ---
Hardness Shore 00 30-60 ASTM D2240
Density g/cc 2.98 ASTM D792
Tensile Strength KN/m 0.4 ASTM D412
Elongation % 65% ASTM D412
Continuous Use Temp -40 to 200 EN344
Breakdown Voltage Kv/mm ≥5.0 ASTM D149
Volume Impedance ohm-cm 1.1*1016 ASTM D257
Thermal Impedance@0.5mm in2/W 0.28 ASTM D5470
Weight Daminify --- ≤0.3﹪ @150℃ 240H
Flame Rating --- V-0 UL 94
Thermal Conductivity W/m.k 3.0 ASTM D5470
SGS, RoHS, REACH --- Compliance ---

Similar Material Comparison
Brand Baisontech Parker Chomerics Fujipoly Laird Bergquist
Model TP300 G579 GR-L Tflex 600 GP2500/GP3000
Conductivity(W/m-K) 3.0 3.0 2.8 3.0 2.7 / 2.6
Thickness(mm) 0.3-10.0 0.25-5.0 0.2-2.0 0.5-2.5 0.5-3.0/0.38-3.175
Shore(00) 30-60 30 53 25-40 80
Compliance UL 94 UL 94 UL 94 UL 94 UL 94

Configurations:

Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on back side.