Low Density Electrical Vehicle Battery Thermal Pad
Low Density Electrical Vehicle Battery Thermal Pad; car power battery thermal silicone pad
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
Low Density Electrical Vehicle Battery Thermal Pad
TP-P10LD/P15LD/P20LD series thermal pad is ultra-light ultra-low density power battery thermal silicone pad which designed for new energy automotive battery cooling. It is a new generation of high thermal conductivity and low thermal resistance products, which is different from the traditional thermal silicone film and thermal program, and it has become a new energy car manufacturers new favorite.
Power battery thermal silicone pad series products are with high deformation flexibility and good compression ratio, which suitable for large-scale design tolerance. It uses special ultra-thin glass fiber cloth double structure, which increase operability and durability, it will not be broken and deformation whether it is punching or die cut. It is also single side self adhesive, and it never retreat, no corrosion on the copper surface, it's completely non-toxic green products, which in line with international requirements.
As the heat generated due to increased demand of faster electronic equipment, if the heat can not effectively escape, the performance of the device tends to be damaged. That's why baisontech's thermal interface material continues to use new technologies in the electronics industry and is seen as an important tool for next-generation devices to achieve higher performance goals.
TP-P10LD/P15LD/P20LD series thermal pad is ultra-light ultra-low density power battery thermal silicone pad which designed for new energy automotive battery cooling. It is a new generation of high thermal conductivity and low thermal resistance products, which is different from the traditional thermal silicone film and thermal program, and it has become a new energy car manufacturers new favorite.
Power battery thermal silicone pad series products are with high deformation flexibility and good compression ratio, which suitable for large-scale design tolerance. It uses special ultra-thin glass fiber cloth double structure, which increase operability and durability, it will not be broken and deformation whether it is punching or die cut. It is also single side self adhesive, and it never retreat, no corrosion on the copper surface, it's completely non-toxic green products, which in line with international requirements.
As the heat generated due to increased demand of faster electronic equipment, if the heat can not effectively escape, the performance of the device tends to be damaged. That's why baisontech's thermal interface material continues to use new technologies in the electronics industry and is seen as an important tool for next-generation devices to achieve higher performance goals.
Characteristic:
Low density, high deformation, suitable for low pressure applications, with fiberglass cloth reinforcement
Application:
New energy car battery pack
Item | Unit | TP-P10LD | TP-P15LD | TP-P20LD | Method |
Color | - | Pink | Pink | Pink/White | Visual |
Reinforced Carrier | - | Fiberglass | Fiberglass | Fiberglass | - |
Inherent Surface Tack (1-/2- sided) | - | one side | one side | one side | - |
Thickness | mm | 0.3~5.0 | 0.3~5.0 | 0.3~5.0 | ASTM D374 |
Density | g/cm3 | 1.6 | 1.7 | 1.9 | ASTM D792 |
Hardness | Shore 00 | 30 | 40 | 50 | - |
Application temperature | ℃ | -60~150 | -60~150 | -60~150 | - |
Tensile Strength | psi | >300 | >300 | >300 | ASTM D412 |
Elongation | % | <10 | <10 | <10 | ASTM D412 |
Total mass loss | % | <0.5 | <0.5 | <0.5 | ASTM E595 |
Dielectric breakdown | KV/mm | >10 | >10 | >10 | ASTM D149 |
Volume resistivity | Ohm-m | >1011 | >1011 | >1011 | ASTM D257 |
Thermal Conductivity | W/m-K | 1.0 | 1.5 | 2.0 | ASTM D5470 |
Thermal impedance@20psi,1.0mm | ℃-In2/W | 1.03 | 0.80 | 0.6 | ASTM D5470 |
Thermal impedance@50psi ,1.0mm | ℃-In2/W | 0.83 | 0.65 | 0.48 | ASTM D5470 |
Flammability | - | V-0 | V-0 | V-0 | UL94 |