Heat Transfer Thermal Pad

China Factory Good Quality Heat Transfer Thermal Pad; Thermal Conductive Pad 0.8w/m-k

Share on google_plusone_share Share on facebook Share on twitter Share on print Share on gmail Share on stumbleupon Share on favorites Share on tumblr More Sharing Services 12

We're here to help Easy ways to get the answers you need. Contact Us

Details

Thermal Conductive Pad 0.8w/m-k; Heat Transfer Thermal Pad

TP080 series heat transfer thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.

Due to its low hardness and great compressibility, TP080 series heat transfer thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.

Heat transfer thermal pad main features:

Thermal conductivity: 0.8 W/m-K

Cost effective

High compressibility

Naturally tacky for easy assembly

Electrically insulating

Enhanced puncture, shear, and tear resistance

Heat transfer thermal pad typical applications:

LED lighting

Power conversion / supply

Heat generating module

Electric vehicle battery

Semiconductor, IC, CPU.MOS and heatsink

Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader

**Heat Transfer Thermal Pad Properties**
Properties	Units	TP080	Test Method
Main Composition	---	Silicone & Ceramic filled	---
Color	---	Gray/Blue	Visual
Thickness Range	mm	0.5~12.0	---
Hardness	Shore C	18 or 35	ASTM D2240
Density	g/cc	2	ASTM D792
Tensile Strength	KN/m	1.3	ASTM D412
Elongation	%	1.35	ASTM D412
Continuous Use Temp	℃	-40 to 200	EN344
Breakdown Voltage	Kv/mm	≥4.0	ASTM D149
Volume Impedance	ohm-cm	1.7*10¹⁶	ASTM D257
Dielectric Constant	1MHz	4.51	ASTM D150
Weight Daminify	---	≤1﹪	@150℃ 240H
Flame Rating	---	V0	UL 94
Thermal Conductivity	W/m.k	0.8	ASTM D5470
SGS, RoHS, REACH	---	Compliance	---

Configurations:

Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)

Available with 3M adhesive on reinforced side.