PRODUCTS SHOW+

Phase Change Interface Material 2.0w/m-K

Phase Change Interface Material 2.0w/m-K
Details
Phase Change Interface Material 2.0w/m-K

TP200 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between heat generating components and heat sinks. 

Due to its low hardness and great compressibility, TP200 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems. 

It can replace Bergquist Gap Pad 2000S40.

TP200 series thermal pad main features:

Thermal conductivity: 2.0 W/m-K

Extremely soft and cost effective

Naturally tacky for easy assembly

Electrically insulating


TP200 series thermal pad typical applications:

LED lighting

Power conversion / supply

Thermal module

Electric vehicle battery

Semiconductor, IC, CPU.MOS and heatsink

Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader


TP200 thermal pad properties
Properties Units TP200 Test Method
Main Composition --- Silicone & Ceramic filled ---
Color --- Light Blue/Dark Gray Visual
Thickness Range mm 0.3~10.0 ---
Hardness Shore 00 30-60 ASTM D2240
Density g/cc 2.3 ASTM D792
Tensile Strength KN/m 1.65 ASTM D412
Elongation % 77% ASTM D412
Continuous Use Temp -40 to 200 EN344
Breakdown Voltage Kv/mm ≥5.0 ASTM D149
Volume Impedance ohm-cm 6.0*1012 ASTM D257
Dielectric Constant 1MHz 4.9 ASTM D150
Thermal Impedance .in2/W ≤0.43 ASTM D 5470
Flame Rating --- V-0 UL 94
Thermal Conductivity W/m.k 2.0 ASTM D5470
SGS, RoHS, REACH --- Compliance ---


Configurations:

Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on back side.