Thermal Conductive Pad TP100
Adhesive Thermal Pad, Electronic Insulator Thermal Pad, Thermal Conductive Pad, TP100 Thermal Pad
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
TP100 Thermal Conductive Pad, Thermal Silicone Gap Filler, Heat Transfer Silicone Pad
TP100 series thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP100 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace Fujipoly Xr-HL, Keratherm 86/200, Laird Tflex200, Bergquist GP V0 soft series
TP100 series thermal pad main features:
Thermal conductivity: 1.0 W/m-K
Cost effective
High compressibility
Naturally tacky for easy assembly
Electrically insulating
Enhanced puncture, shear, and tear resistance
TP100 series thermal pad typical applications:
LED lighting
Power conversion / supply
Heat generating module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Properties | Units | TP100 | Test Method |
Main Composition | --- | Silicone & Ceramic filled | --- |
Color | --- | Milky White | Visual |
Thickness Range | mm | 0.5~10.0 | --- |
Hardness | Shore 00 | 20~25 | ASTM D2240 |
Density | g/cc | 2.2 | ASTM D792 |
Tensile Strength | KN/m | 1.3 | ASTM D412 |
Elongation | % | 50 | ASTM D412 |
Continuous Use Temp | ℃ | -40 to 200 | EN344 |
Breakdown Voltage | Kv/mm | ≥10.0 | ASTM D149 |
Volume Impedance | ohm-cm | 1.7*1016 | ASTM D257 |
Dielectric Constant | 1MHz | 4.87 | ASTM D150 |
Thermal Impedance@0.5mm | ℃in2/W | 0.75 | ASTM D5470 |
Flame Rating | --- | V0 | UL 94 |
Thermal Conductivity | W/m.k | 1.0 | ASTM D5470 |
SGS, RoHS, REACH | --- | Compliance | --- |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on reinforced side.