Thermal Conductive Pad TP120
TP120 Thermal Pad, Thermal Gap Filler, Conductive Silicone Pad, Thermal Conductive Foil
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
TP120 Thermal Conductive Pad, Thermal Conductive Gap Filler, Electrical Thermal Silicone Pad
TP120 series thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP120 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace bergquist GP1000, Fujipoly XR-L.
TP120 series thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP120 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace bergquist GP1000, Fujipoly XR-L.
TP120 series thermal pad main features:
Thermal conductivity: 1.2 W/m-K
Extremely soft and cost effective
Naturally tacky for easy assembly
Electrically insulating
TP120 series thermal pad typical applications:
LED lighting
Power conversion / supply
Thermal module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Properties | Units | TP120 | Test Method |
Main Composition | --- | Silicone & Ceramic filled | --- |
Color | --- | Pink/Gray | Visual |
Thickness Range | mm | 0.5~5.0 | --- |
Hardness | Shore 00 | 50-55 | ASTM D2240 |
Density | g/cc | 2.3 | ASTM D792 |
Tensile Strength | KN/m | 1.0 | ASTM D412 |
Elongation | % | 70% | ASTM D412 |
Continuous Use Temp | ℃ | -40 to 200 | EN344 |
Breakdown Voltage | Kv/mm | ≥10.0 | ASTM D149 |
Volume Impedance | ohm-cm | 3.5*1012 | ASTM D257 |
Dielectric Constant | 1MHz | 3.87 | ASTM D150 |
Thermal Impedance@0.5mm | ℃in2/W | 0.65 | ASTM D5470 |
Flame Rating | --- | V0 | UL 94 |
Thermal Conductivity | W/m.k | 1.2 | ASTM D5470 |
SGS, RoHS, REACH | --- | Compliance | --- |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on back side.