Thermal Pad TP400 Silicone Gel Film
Thermal Pad TP400 Silicone Gel Film, thermal silicone pad 4.0W/m-k, thermal conductive pad 4.0W/m-k
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
Thermal Pad TP400 Silicone Gel Film
TP450 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between
heat generating components and heat sinks.
It can replace Fujipoly GR45A / GR-m , Laird Tflex 700 , Bergquist GP3000 series.
TP450 series thermal pad is naturally sticky silicone based insulation conductive material which is used to fill air gaps between
heat generating components and heat sinks.
It can replace Fujipoly GR45A / GR-m , Laird Tflex 700 , Bergquist GP3000 series.
TP400 series thermal pad main features:
Thermal conductivity: 4.0 W/m-K
Extremely soft and cost effective
Naturally tacky on both sides
Electrically insulating
TP400 series thermal pad typical applications:
LED lighting
Power conversion / supply
Thermal module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Properties | Units | TP400 | Test Method |
Main Composition | --- | Silicone & Ceramic filled | --- |
Color | --- | Pink/Gray/Blue | Visual |
Thickness Range | mm | 0.3~10.0 | --- |
Hardness | Shore 00 | 40-45 | ASTM D2240 |
Density | g/cc | 3.1 | ASTM D792 |
Tensile Strength | KN/m | 0.4 | ASTM D412 |
Elongation | % | 75% | ASTM D412 |
Continuous Use Temp | ℃ | -40 to 200 | EN344 |
Breakdown Voltage | Kv/mm | ≥6.0 | ASTM D149 |
Volume Impedance | ohm-cm | 1.0*1013 | ASTM D257 |
Dielectric Constant | 1MHz | 5.5 | ASTM D150 |
Thermal Impedance@0.5mm | ℃in2/W | 0.26 | ASTM D5470 |
Flame Rating | --- | V-0 | UL 94 |
Thermal Conductivity | W/m.k | 4.0 | ASTM D5470 |
SGS, RoHS, REACH | --- | Compliance | --- |
Brand | Baisontech | Fujipoly | Laird | Bergquist |
Model | TP400 | GR45A | Tflex 700 | GP3000S30 |
Conductivity(W/m-k) | 4.0 | 4.5 | 5 | 3.0 |
Thickness(mm) | 0.3-10.0 | 0.5-3.0 | 0.5-5.0 | 0.25-3.2 |
Hardness(Shore 00) | 40-45 | 50 | 50 | 30 |
Compliance | UL 94 | UL 94 | UL 94 | UL 94 |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with PSA on reinforced side.