Thermal Silicon Pad 1.0W/m-K
Thermal Silicon Pad 1.0W/m-K, Thermal Conductive Pad TP100
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
Thermal Silicon Pad 1.0W/m-K, Thermal Conductive Pad TP100
TP100 series pcb board thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP100 pcb board thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace Fujipoly Xr-HL, Keratherm 86/200, Laird Tflex200, Bergquist GP V0 soft series
Thermal Silicon Pad 1.0W/m-K Main Features:
Thermal conductivity: 1.0 W/m-K
Cost effective
High compressibility
TP100 series pcb board thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP100 pcb board thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
It can replace Fujipoly Xr-HL, Keratherm 86/200, Laird Tflex200, Bergquist GP V0 soft series
Thermal Silicon Pad 1.0W/m-K Main Features:
Thermal conductivity: 1.0 W/m-K
Cost effective
High compressibility
Naturally tacky for easy assembly
Electrically insulating
Enhanced puncture, shear, and tear resistance
Thermal Silicon Pad 1.0W/m-K Typical Applications:
LED lighting
Power conversion / supply
Heat generating module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
| Properties | Units | TP100 | Test Method |
| Main Composition | --- | Silicone & Ceramic filled | --- |
| Color | --- | Milky White | Visual |
| Thickness Range | mm | 0.5~10.0 | --- |
| Hardness | Shore 00 | 20~25 | ASTM D2240 |
| Density | g/cc | 2.2 | ASTM D792 |
| Tensile Strength | KN/m | 1.3 | ASTM D412 |
| Elongation | % | 50 | ASTM D412 |
| Continuous Use Temp | ℃ | -40 to 200 | EN344 |
| Breakdown Voltage | Kv/mm | ≥10.0 | ASTM D149 |
| Volume Impedance | ohm-cm | 1.7*1016 | ASTM D257 |
| Dielectric Constant | 1MHz | 4.87 | ASTM D150 |
| Thermal Impedance@0.5mm | ℃in2/W | 0.75 | ASTM D5470 |
| Flame Rating | --- | V0 | UL 94 |
| Thermal Conductivity | W/m.k | 1.0 | ASTM D5470 |
| SGS, RoHS, REACH | --- | Compliance | --- |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on reinforced side.
